Skip to end of metadata
Go to start of metadata

Operating SystemLinux
BSP Release Status

RELEASE CANDIDATE

Release Date
 
Repository 
Binariesphycore-AM57xx-PD15.1-rc2 BSP Release
Source Archive 
Release Notes

Click Here

This is a Release Candidate BSP. Please use this BSP ONLY for evaluation purposes. PHYTEC does not recommend starting any development based on this BSP. As of , TI has released a newer version 02.00.00.01 SDK and we are working to utilize this for our first official release.



Introduction


 

This BSP provides a basis for development, deployment and execution of Linux based applications on the AM57x System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.

Versioning


Software

ComponentVersion
Android4.1.2
Linux Kernel3.2
Barebox2013.07.0

ComponentVersion
Linux Kernel4.1.6 (2015 LTS) (Based on TI SDK 02.00.00.00)
Yocto1.8 (Fido) (Based on TI SDK 02.00.00.00)
OpenCL1.1
Qt5.5
bareboxN/A
u-boot2015.07 (Based on TI SDK 02.00.00.00)

Linux Device Tree Summary

Default dts targetam57xx-phycore-rdk.dts
Default dtsi include descriptionDefault dtsi include list
SOMam57xx-phycore-som.dtsi
Carrier Boardam57xx-pcm-948.dtsi
LCD-018 display (7" display w/ cap. touch)am57xx-phytec-lcd-018.dtsi
WiLink8am57xx-phytec-wlan-wilink8.dtsi

Compatible Hardware

SOM PCB VersionCB PCB Version
1428.21435.2

 

BSP Download


Prebuilt images of phyCORE-AM57xx-PD15.1-rc2 can be downloaded from the link below:

phycore-AM57xx-PD15.1-rc2 BSP Release

Quickstart


Quickstarts for phyCORE-AM57xx-PD15.1-rc2:

BSP Features


InterfaceDetail

Implemented

TestedEnabled in DTS

Notes

UART






uart3YesYesYesConnector X18 (default serial console)
uart4YesNo[click for info] 
uart5YesNo[click for info]Connector X17
uart6YesNo[click for info] 
uart7YesNo[click for info] 
uart8YesNo[click for info] 
uart9YesNo[click for info] 
uart10YesNo[click for info] 
I2C



i2c1YesYesYesAvailable on expansion Connector X28
i2c2YesYesYesConnected to HDMI1_DDC
i2c3YesNo[click for info] 
i2c4YesYesYesUsed for Audio Codec - available on expansion Connector X28
i2c5YesNo[click for info] 
Ethernetcpsw_emac0 (RGMII0 on SoM)YesYesYes

RGMII0 - KSZ9031RNX SoM PHY

Connector X7

cpsw_emac1 (RGMII1 on CarrierBoard)Yessee Known IssuesYes

RGMII1 - KSZ9031RNX Connector X8

Display and TouchAnalog Touch Control 1YesYesYesCapacitive: ETM-FT5x06 (on LCD-018), I2C4
Analog Touch Control2NoNoNoResistive: STMPE811 (on CB), I2C4
PWM BacklightYesYesYesehrpwm0 (EHRPMW1A on CB)
24-bit LCD InterfaceYessee Known Issues Yes

LVDS Connector X25

requires LCD-018

HDMIYessee Known Issues No

hdmi1_ddc

Connector X24 (encoder TPD12S on carrier board)

McASP




mcasp1Yessee Known Issues Yes 
mcasp2YesNo[click for info] 
mcasp5YesNo[click for info] 
mcasp6YesNo[click for info] 
mcasp7YesNo[click for info] 
mcasp8YesNo[click for info] 
eMMC/SD/SDIO

mmc1YesYesYesConnector X2
mmc2YesYesYeseMMC on SOM
mmc3YesYesYesConnector X26 (WiFi/BT connector)
USBusb1YesYesYesUSB 3.0 Standard-A Connector X30 (Host only)
usb2Yessee Known IssuesYesUSB 2.0 Mini-AB Connector X9 (device default); signals may also be routed to X19 (Standard-A)
CANcan1YesYesYesDB9 Connector X6
can2YesYesYesPin Header Connector X5
MCSPI


spi1YesNo[click for info] 
spi2YesNo[click for info] 
spi3YesNo[click for info] 
spi4YesNo[click for info] 
QSPIqspi1YesNoNoNOR Serial Flash on SOM
SATAsata1YesYesYesConnector X11 (SATA) and X12 (power connector)
PCIepcie1Yessee Known IssuesNoConnector X27 (PI6C557 4x PCIe Connector)
IPUipu1YesYesYes 
ipu2YesYesYes 
DSPdsp1YesYesYes 
dsp2YesYesYes 
GPIO

User Buttons and LEDs

YesYesYes 
MemoryEEPROMYesYesYesM24C32 on I2C1
NAND (8/16 bit)YesNoNoNo NAND populated
QSPI NOR FlashNoNoNoN25Q128A connected to QSPI1
eMMCYesYesYesmmc2 on SOM
RTCInternal AM57xxYesYesYesInternal to processor
PMIC TPS659037 YesYesYesTPS659037 I2C1
External RTCYesYesYesRV-4162-C7 on I2C1
Audio

Stereo Codec on CarrierBoard

Yessee Known Issues YesTLV320AIC3007 codec; connected to McASP1 and I2C4
CommunicationTiWi-BLE WiFiNoNoNoConnector X26
TiWi-BLE BluetoothNoNoNoConnector X26
WiLink8 WiFiYesYesYesConnector X26
Parallel CameraVIN3 on i2c3NoNoNot ConfiguredX23 (phyCAM-P connector)
Hardware AccelerationGraphics (PowerVR SGX544)Yessee Known Issues Yes 

[1]  It may be possible to change the software configuration to utilize this interface even if it is not being set in the board's default configuration. 

 

Fixed In This Release


  • Kernel
    • Graphicsomapdrm-pvr fails to load or results in kernel panic: When attempting to use either the HDMI or LCD interfaces with the Weston init scripts and other PowerVR examples, the system hangs on a kernel panic. As a result, HDMI, LCD, and DSS are currently disabled in software until the error is resolved.
    • Audioaplay results in a mcasp transmit buffer underflow error.

New In This Release


  • Kernel
    • Connectivity: The WiLink8 module is now supported and enabled.
    • Display: The 7" LCD-018 display panel with ft5x06 capacitive touch is now supported and enabled.
    • Input: FocalTech EDT-FT5406 Capacitive Touch Controller is now supported and enabled.
    • RTC: External RTC RV-4162-C7 is now supported and enabled.

Known Issues


PHYTEC Known Issues

  • Kernel
    • Audioaplay results in occasional MMU/DSP failures. There is no current workaround. System may require reboot when this is observed.
    • Power: VBUS_DET implementation prevents complete poweroff. USB2 uses the PMIC VBUS_DET circuit, and when VBUS is provided by the processor (USB2 in host mode), the USB2_VBUS signal connected to the PMIC generates a WAKE event. As a result, the PMIC powers the system back up as soon as the shutdown finishes.
    • USB: USB2 OTG fails to transition from host to device mode: USB2 is configured for 'otg' mode by default. When the system turns on, it will properly be detected as a device when plugged into a host machine. Plug and un-plug events are detected. If a device is plugged in to the USB2 port, triggering host mode behavior from the system, it will remain in host mode until the next warm reset or cold boot.
    • Display: When HDMI and LCD-018 are both enabled in the DTS, the LCD-018 display does not output data properly. The workaround is to enable one or the other, and LCD-018 is currently the default.
    • General: a kernel panic often occurs during the poweroff process after it appears to complete. There is no current workaround, but it has a low impact.
    • Ethernet: SOMs populated with AM572x silicon revision 2.0, ethernet auto-negotiates but fails to acquire an IP from DHCP or communicate when provided a static IP. There are no issues with silicon revision 1.0 or 1.1.
  • Yocto

    • Package ltp-ddt fails to build with arago-core-tisdk-image. Workaround implemented in build to remove ltp-ddt.
  • U-boot
    • Processor fan is not enabled in u-boot.

Texas Instruments Known Issues

Technical Support

For further support please visit PHYTEC's Support Portal