Operating SystemAndroid
BSP Release Status

RELEASED

Release Date

   

RepositoryPHYTEC Public Repos
BinariesBSP-Android-FSL-i.MX8MM-ALPHA1

Introduction


 This BSP provides a basis for development, deployment and execution of Android based applications on the phyCORE- i.MX8M mini System on Module (SOM). For detailed information on the various software components included in the release and how to use them, please refer to the BSP Development Guide.

Versioning


Software

NXP Kernelv5.4.3 (Android)PHYTEC Source Repo
U-Bootv2019.04PHYTEC Source Repo
Android releaseQ10.0.0_2.0.0PHYTEC Source Repo
Host OSTested on 64-bit Ubuntu 16.04 LTSUbuntu 16.04 Release

Compatible Hardware


 Supported Hardware Versions

Hardware DescriptionPart Number

PCB Version

PCB Version
phyCORE-i.MX8MM Development KitKPB-02820-001.A0

SOM: 1518.2

Carrier Board: 1532.1

NXP i.MX8M mini Quad / 2 GB LPDDR4 / EEPROM / Ethernet / RTC / Industrial Temperature

Compatible Expansion Boards and Accessories


Module NamePart NumberPCB VersionDescription
10" Capacitive Touch Display

KPEB-AV-10-100.A0

1531.0AV expansion board for the phyCORE-i.MX8M mini development kit (phyBOARD-Polis)

Pre-Built Binaries


Pre-built images for the phyCORE-i.MX8M mini development kit can be downloaded from here

BSP Development Guide


 BSP Development Guide

BSP Features


InterfaceDetail

Implemented

TestedStatus in Device tree

Notes

UART






uart1NoNoOkayConnector X9 available at RS-232 or RS-485
uart2NoNoOkayTTL 3.3V level at connector X18 
uart3YesYesOkayConnector X8 (default console)
uart4YesYesOkayTTL 3.3V level at connector X8 
I2C



i2c1Yes
OkayAvailable on expansion Connector X28
i2c2Yes
OkayConnected X6 - Mini PCI-Express
i2c3Yes
OkayConnector X8, X18. X38 Used for audio
i2c4Yes

Connector X10 - MIPI-CSI
EthernetRGMII on SOMYesYesOkay

ETH0 Connector X1

Gigabit Ethernet Transceiver (DP83867IRRGZT)

Display and TouchLVDSYesYesOkayKPEB-AV-10-100.A0 connected to A/V Connectors X16 & X18
eMMC/SD/SDIO

SD1NoNo
WLAN - Component Reference U3
SD2YesYesOkayuSD-Card Connector X4
SD3YesYesOkayeMMC - Component Reference U21
USBusb1YesYesOkay

USB OTG1 Connector X2 (default)

usb2YesYesOkay

USB 2.0 Hub with the following connections:

  • usb hub channel 1 - Standard USB-A Connector X5 (Host only)
  • usb hub channel 4 - Expansion Connector X8
FD-CANECSPI1NoNo
Connector X7
ECSPI


ECSPI1YesYesOkay

Connector X8 (Expansion connector) enabled using spidev on X_ECSPI1_SS1

ECSPI2NoNo
This bus only connects to the TPM (Trusted Platform Module)
Mini-PCIepcie1NoNo
Connector X6
GPIO






LEDsRGB LEDYesYes
Component Reference D11
MemoryEEPROMYesYesOkayM24C32 on I2C1
QSPI NOR FlashNoNo
N25Q128A connected to QSPIA_SS0
eMMCYesYesOkaymmc2 on SOM
RTCInternal i.MX8M miniYesYesOkayInternal to processor
PMIC RTCYesNo
MC32PF8121F9EP on I2C1
External RTCYesYes
RV-3028-C7 on I2C1
CommunicationSterling-LWB Module WiFiNoNo
Component Reference U3
Sterling-LWB Module BluetoothNoNo
Component Reference U3
Camerai2c4NoNo

Connector X10

New in this Release



Known Issues


Known Issues

Technical Support


For further support please visit PHYTEC's Support Portal