The phyCORE-i.MX7 SOM comes equipped with a hardware Watchdog that is accessible through /dev/watchdog. The Watchdog feature is intended to automatically restart the system should it face a critical software or hardware hang up. This guide will walk through the basic setup and verification of the watchdog by manually triggering a Kernel panic to initiate an automatic reboot.
- Ensure that your phyCORE-i.MX7 Development Kit is booted into Linux and that you are logged in as the root user.
Set the Watchdog's timeout to 10 seconds using the following command:
wdctl -s 10CODE
Now manually trigger a Kernel failure:
echo c > /proc/sysrq-triggerCODE
- You should see the phyCORE-i.MX7 begin to reboot approximately 10 seconds after the end of the Kernel panic.