phyCORE-OMAP4430 Release Linux BSP-PD11.1.0
phyCORE-OMAP4430 Linux Board Support Package PD11.1.0 Release Notes
Versioning
This is release PD11.1.0 of phyCORE-OMAP4430 Linux Board Support Package (BSP).
Introduction
This BSP provides a basis for development, deployment and execution of Linux based applications on the phyCORE-OMAP4430 System on Module.
For detailed information on the various software components included in the release and how to use them, please refer to the Quickstart.
BSP Download
Release PD11.1.0 can be downloaded from the link below.
ftp://ftp.phytec.com/products/PCM-049_phyCORE-OMAP44xx/Linux/PD11.1.0/
Quickstart
Release PD11.0.0 should be used in conjunction with Quickstart version PD11.1.0:
What’s Supported
This BSP Release supports the following components:
- Linux Kernel and device drivers:
- Serial Console
- USB Host: Keyboard, Mouse, Memory
- USB OTG: Device
- Ethernet
- SD-Card
- Audio
- I2C with EEPROM, PMIC, Touch Controller support
- SPI
- Display Primeview-PD050VL1
- Display Primeview-PD104SLF
- Display Primeview-PM070WL4
- PowerVR SGX540*
- Qt 4.7 Support
Important:
The demo binary image included in Release PD11.1.0 does not enable SPI. If SPI is required, you must enable SPI with your own build.
OpenGL support is not activated in the Images nor in the BSP due the GraphicSDK licences. It can be activated with PTXdist with:
ptxdist menuconfig
PTXdist Base Configuration --->
Graphics & Multimedia --->
<*> graphics_sdk --->
(y) Accept the License for Graphics SDK?
OMAPES (7.x for AM45x (Panda board/phyCORE-OMAP4))
[*] install /etc/init.d/rc.pvr
save & exit
ptxdist images
What’s Not Supported
Coming soon...
Fixed in this Release
N/A
New in this Release
N/A
Known Issues
- Display and DVI does not work when used parallel
- In some rare cases the serial connection sends garbage while booting
Device Support
This Release is compatible with the following hardware:
| BSP Release | SOM PCB Version | CB PCB Version |
|---|
| PD11.1.0 | 1347.1 | 1348.2 |
| PD11.1.0 | 1347.1 | 1348.1 |
To upgrade to a new BSP release, simply delete the old release and extract the new release in its place.
Dependencies
N/A
Technical Support